888-628-5030
Contact Us
   
Home >> THREAD TURNING >> LAYDOWN >> INSERTS >> 55 DEGREE PARTIAL PROFILE
   
Seach within these results for:
Results
You searched for: 55 DEGREE PARTIAL PROFILE
Results Displayed: 1 - 30 of 87
  »Page Size:   Results Page:  1  2  3 
Item IDDescriptionUOMQuantity
06ILA55BXC
20100071
CentrLn to Cut Edge:0.02"/0.5mm;Cut Edge to Matl:0.02"/0.6mm;IC:(5/32)";IN-LH;Insert Size:6mm;Matl:Carbide;Pitch Range:0.50-1.25mm;Pitch Range:48.00-20.00 TPI;Pitch:00.50-01.25mm;Thread Form:Partial Profile 55°
06IRA55BXC
20100089
CentrLn to Cut Edge:0.02"/0.5mm;Cut Edge to Matl:0.02"/0.6mm;IC:(5/32)";IN-RH;Insert Size:6mm;Matl:Carbide;Pitch Range:0.50-1.25mm;Pitch Range:48.00-20.00 TPI;Pitch:00.50-01.25mm;Thread Form:Partial Profile 55°
08ILA55BXC
20200098
CentrLn to Cut Edge:0.02"/0.6mm;Cut Edge to Matl:0.03"/0.7mm;IC:(3/16)";IN-LH;Insert Size:8mm;Matl:Carbide;Pitch Range:0.50-1.50mm;Pitch Range:48.00-16.00 TPI;Pitch:00.50-01.50mm;Thread Form:Partial Profile 55°
08IRA55BMA
20200117
CentrLn to Cut Edge:0.02"/0.6mm;Cut Edge to Matl:0.03"/0.7mm;IC:(3/16)";IN-RH;Insert Size:8mm;Matl:Carbide;Pitch Range:0.50-1.50mm;Pitch Range:48.00-16.00 TPI;Pitch:00.50-01.50mm;Thread Form:Partial Profile 55°
08IRA55BXC
20200118
CentrLn to Cut Edge:0.02"/0.6mm;Cut Edge to Matl:0.03"/0.7mm;IC:(3/16)";IN-RH;Insert Size:8mm;Matl:Carbide;Pitch Range:0.50-1.50mm;Pitch Range:48.00-16.00 TPI;Pitch:00.50-01.50mm;Thread Form:Partial Profile 55°
08UIRLU55BXC
20200142
CentrLn to Cut Edge:0.03"/0.9mm;Cut Edge to Matl:0.16"/4.0mm;IC:(3/16)";IN-RH/LH;Insert Size:8mm;Matl:Carbide;Pitch Range:1.75-2.00mm;Pitch Range:14.00-11.00 TPI;Pitch:01.75-02.00mm;Thread Form:Partial Profile 55°
1155DBMA
50100001
#Edges:3;#Teeth:1;EX/IN-RH/LH;Grade:BMA;Matl:Carbide;Pitch Range-Ext:24.00-14.00 TPI;Pitch Range-Int:24.00-14.00 TPI;Thread Form:Partial Profile 55°
11ERA55BMA
20300043
CentrLn to Cut Edge:0.03"/0.8mm;Cut Edge to Matl:0.04"/0.9mm;EX-RH;IC:(1/4)";Insert Size:11mm;Matl:Carbide;Pitch Range:0.50-1.50mm;Pitch Range:48.00-16.00 TPI;Pitch:00.50-01.50mm;Thread Form:Partial Profile 55°
11ERA55MXC
20300045
CentrLn to Cut Edge:0.03"/0.8mm;Cut Edge to Matl:0.04"/0.9mm;EX-RH;IC:(1/4)";Insert Size:11mm;Matl:Carbide;Pitch Range:0.50-1.50mm;Pitch Range:48.00-16.00 TPI;Pitch:00.50-01.50mm;Thread Form:Partial Profile 55°
11ILA55BMA
20300876
CentrLn to Cut Edge:0.03"/0.8mm;Cut Edge to Matl:0.04"/0.9mm;IC:(1/4)";IN-LH;Insert Size:11mm;Matl:Carbide;Pitch Range:0.50-1.50mm;Pitch Range:48.00-16.00 TPI;Pitch:00.50-01.50mm;Thread Form:Partial Profile 55°
11ILA55MXC
20300090
CentrLn to Cut Edge:0.03"/0.8mm;Cut Edge to Matl:0.04"/0.9mm;IC:(1/4)";IN-LH;Insert Size:11mm;Matl:Carbide;Pitch Range:0.50-1.50mm;Pitch Range:48.00-16.00 TPI;Pitch:00.50-01.50mm;Thread Form:Partial Profile 55°
11IRA55BMA
20300349
CentrLn to Cut Edge:0.03"/0.8mm;Cut Edge to Matl:0.04"/0.9mm;IC:(1/4)";IN-RH;Insert Size:11mm;Matl:Carbide;Pitch Range:0.50-1.50mm;Pitch Range:48.00-16.00 TPI;Pitch:00.50-01.50mm;Thread Form:Partial Profile 55°
11IRA55MXC
20300352
CentrLn to Cut Edge:0.03"/0.8mm;Cut Edge to Matl:0.04"/0.9mm;IC:(1/4)";IN-RH;Insert Size:11mm;Matl:Carbide;Pitch Range:0.50-1.50mm;Pitch Range:48.00-16.00 TPI;Pitch:00.50-01.50mm;Thread Form:Partial Profile 55°
11IRZAG55BMA
20300620
11mm (1/4" I.C.) LAYDOWN INSERT FOR 55-DEG PART PROF INT-RH THREAD; PITCH: 08.00 TPI - 48.00 TPI,00.50mm - 03.00mm; GRADE: BMA; FOR SANVIK HOLDERS
11U55DBMA
50100003
#Edges:3;#Teeth:1;EX/IN-RH/LH;Grade:BMA;Matl:Carbide;Pitch Range-Ext:12.00-7.00 TPI;Pitch Range-Int:12.00-7.00 TPI;Thread Form:Partial Profile 55°
16ELA55MXC
20401691
CentrLn to Cut Edge:0.03"/0.8mm;Cut Edge to Matl:0.04"/0.9mm;EX-LH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:0.50-1.50mm;Pitch Range:48.00-16.00 TPI;Pitch:00.50-01.50mm;Thread Form:Partial Profile 55°
16ELAG55BMA
20401702
CentrLn to Cut Edge:0.05"/1.2mm;Cut Edge to Matl:0.07"/1.7mm;EX-LH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:0.50-3.00mm;Pitch Range:48.00-8.00 TPI;Pitch:00.50-03.00mm;Thread Form:Partial Profile 55°
16ELAG55MXC
20401705
CentrLn to Cut Edge:0.05"/1.2mm;Cut Edge to Matl:0.07"/1.7mm;EX-LH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:0.50-3.00mm;Pitch Range:48.00-8.00 TPI;Pitch:00.50-03.00mm;Thread Form:Partial Profile 55°
16ELG55MXC
20401716
CentrLn to Cut Edge:0.05"/1.2mm;Cut Edge to Matl:0.07"/1.7mm;EX-LH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:1.75-3.00mm;Pitch Range:14.00-8.00 TPI;Pitch:01.75-03.00mm;Thread Form:Partial Profile 55°
16ERA55HBA
20403837
CentrLn to Cut Edge:0.03"/0.8mm;Cut Edge to Matl:0.04"/0.9mm;EX-RH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:0.50-1.50mm;Pitch Range:48.00-16.00 TPI;Pitch:00.50-01.50mm;Thread Form:Partial Profile 55°
16ERA55MXC
20402004
CentrLn to Cut Edge:0.03"/0.8mm;Cut Edge to Matl:0.04"/0.9mm;EX-RH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:0.50-1.50mm;Pitch Range:48.00-16.00 TPI;Pitch:00.50-01.50mm;Thread Form:Partial Profile 55°
16ERAG55BLU
20403639
CentrLn to Cut Edge:0.05"/1.2mm;Cut Edge to Matl:0.07"/1.7mm;EX-RH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:0.50-3.00mm;Pitch Range:48.00-8.00 TPI;Pitch:00.50-03.00mm;Thread Form:Partial Profile 55°
16ERAG55BMA
20402018
CentrLn to Cut Edge:0.05"/1.2mm;Cut Edge to Matl:0.07"/1.7mm;EX-RH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:0.50-3.00mm;Pitch Range:48.00-8.00 TPI;Pitch:00.50-03.00mm;Thread Form:Partial Profile 55°
16ERAG55HBA
20403838
CentrLn to Cut Edge:0.05"/1.2mm;Cut Edge to Matl:0.07"/1.7mm;EX-RH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:0.50-3.00mm;Pitch Range:48.00-8.00 TPI;Pitch:00.50-03.00mm;Thread Form:Partial Profile 55°
16ERAG55K20
20402022
CentrLn to Cut Edge:0.05"/1.2mm;Cut Edge to Matl:0.07"/1.7mm;EX-RH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:0.50-3.00mm;Pitch Range:48.00-8.00 TPI;Pitch:00.50-03.00mm;Thread Form:Partial Profile 55°
16ERAG55MXC
20402023
CentrLn to Cut Edge:0.05"/1.2mm;Cut Edge to Matl:0.07"/1.7mm;EX-RH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:0.50-3.00mm;Pitch Range:48.00-8.00 TPI;Pitch:00.50-03.00mm;Thread Form:Partial Profile 55°
16ERAG55P25C
20402024
CentrLn to Cut Edge:0.05"/1.2mm;Cut Edge to Matl:0.07"/1.7mm;EX-RH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:0.50-3.00mm;Pitch Range:48.00-8.00 TPI;Pitch:00.50-03.00mm;Thread Form:Partial Profile 55°
16ERBAG55BMA
20402020
CentrLn to Cut Edge:0.05"/1.2mm;Cut Edge to Matl:0.07"/1.7mm;EX-RH;Grade:BMA;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:0.50-3.00mm;Pitch Range:48.00-8.00 TPI;Pitch:00.50-03.00mm;Thread Form:Partial Profile 55°
16ERBG55BMA
20402040
CentrLn to Cut Edge:0.05"/1.2mm;Cut Edge to Matl:0.07"/1.7mm;EX-RH;Grade:BMA;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:1.75-3.00mm;Pitch Range:14.00-8.00 TPI;Pitch:01.75-03.00mm;Thread Form:Partial Profile 55°
16ERG55BMA
20402038
CentrLn to Cut Edge:0.05"/1.2mm;Cut Edge to Matl:0.07"/1.7mm;EX-RH;IC:(3/8)";Insert Size:16mm;Matl:Carbide;Pitch Range:1.75-3.00mm;Pitch Range:14.00-8.00 TPI;Pitch:01.75-03.00mm;Thread Form:Partial Profile 55°
 
  »Page Size:   Results Page:  1  2  3 
   
footer image

2033 Innovation Way
Hartford WI 53027
Toll-Free: 888.628.5030
Phone: 262.628.5030
Fax: 262.628.5302

Youtube LinkedIN   Carmex Precision Tools LLC. © All Rights Reserved.